ČeskyEnglish

Users login



Operating instruction Print E-mail

The "REBEL" trailer

The "REBEL" trailers are intended exclusively for connection to the motorcycles up to 400kg. Load up to 25kg is allowed.

navod-k-obsluze-01It is always necessary to oil the guiding pin of the connection device (fork joint) using a solid grease before the trailer is connected to the motorcycle. After insertion of the guiding pin and locking it using a nut, lock it once more against protrusion by using a split pin supplied by the producer.

Every time the trailer and the electric outlet are connected it is necessary to check the correct operation of lights and trafficators. After disconnection of the trailer it is necessary to provide a capping strip against its damage (supplied by the producer) to both sides of the electric outlet.

Before each ride check if the cargo space cover is properly provided with a lock against spontaneous opening.

The trailer is equipped with a tyre with standard size 120/70/12. Specified pressure inside the tyre is 200kpa. The trailer is also equipped with shock-absorber with the possibility of flyback regulation. The regulation of the shock-absorber flyback is done just on the shock-absorber via the red lever according to the demonstrated scheme. The basic configuration done by the producer corresponds to loading about 10kg to 15kg.

Declaration

This good is consistent with the type approved by the Transport Department of the Czech Republic under the number of approbation 7105.

Warning

The "REBEL" trailer is made for maximum cargo weight 25kg.

The speed limit for the motorcycle with the "REBEL" trailer is 100km/h.

 

 

 

Napsali o nás

Rebel aneb Když je málo místa, ČMN, 8. 1. 2009

Nový jednostopý vozík se zrodil v České republice. Po legendárních Pavech jsou tu Rebelové. Nedostatek zavazadlového prostoru na motocyklu řeší pravděpodobně každý motorkář, který se nespokojí pouze s jednodenními výlety s minimem bagáže...

Celý článek zde.